SANNIX GP-3000R
Outline
Polyether Polyol for polyurethane foam. Raw Material for Rubber and Polyurethane Resin
Features
· Polyoxypropylene glyceryl ether for soft slab foam with a particularly low diol content.
· Polyurethane foams produced by using this product have excellent scorch resistance.
Functions
- ・Plasticizing/Softening
- ・Adhesive
- ・Cold or Heat Insulating
- ・Reacting/Forming
- ・Sealing/Waterproofing
Applications
- ・Textiles
- ・Paints
- ・Adhesives
- ・Automobiles
- ・Synthetic Resins & Rubbers
- ・Polyurethane Foams
- ・Polyurethane Resins
- ・Housing/Environmental Protection
Composition
Polyols Polyether polyol
Properties, and other information
| Principal Component | Polypropylene triol | Appearance | Colorless to pale yellow liquid | pH(Sample Concentration) | 6.5 |
| Viscosity（mPa･s） | 510（25℃） | Hydroxyl Value | 56 |
Precaution Against Mishandling
· If water gets into the this product, the foaming ratio will change and desiredl polyurethane foam may not be obtained. Avoid contaminating with water and absorbing moisture.
· When mixed with the isocyanate component, it reacts at room temperature without a catalyst and cures with heat generation, so never premix with the isocyanate component.
· If polyurethane foam is manufactured on a foam scale that uses more than 1 kg of polyol, heat from the reaction may accumulate inside the polyurethane foam and ignite. Avoid stacking polyurethane foam for about 10 hours after foaming, and store in a cool place.
Before handling this product, refer to the current Safety Data Sheet for recommended protective equipment, and detailed precautionary and hazards information.If SDS is not listed on the homepage, please contact our sales representative.
