ACLUBE V-4131
Outline
Viscosity Index Improver for Multi-grade Gear Oils, ATFs, CVTFs and Hydraulic Fluids, Exhibiting Excellent Shear Stability
Features
· A viscosity index improver for hydraulic fluids which consists of a methacrylate copolymer and a refined mineral oil.
· Suitable for preparation of engine oils for automobiles which needs durability and high fuel efficiency because this product exhibits excellent shear stability and viscosity index improvement for base oils.
Functions
- ・Lubricating/Leveling
- ・Viscosity Controlling
Applications
- ・Automobiles
- ・Lubricants
Composition
Methacrylate/Acrylate-based Polymethacrylate-type
Properties, and other information
| Principal Component | methacrylate copolymer and a refined mineral oil | Appearance | Pale yellow - yellow liquid | Color（hazen, Gardner, etc） | 0.5（ASTM） |
| Kinematic viscosity（mm²/s）（temperature measurement） | 850（100℃） | Density(g/cm3 , ℃, etc） | 0.88（15℃） |
Precaution Against Mishandling
· Evenly dissolve this product in a base oil. If this product is unevenly dissolved in the base oil, this product may not exhibit its expected viscosity index improvement.
· Before blending this product with a high-viscosity base oil (e.g., bright stock), low polarity base oil (e.g., highly refined mineral oil) or lubricating oil additives (e.g., a detergent or a dispersant) in large amounts, test that the blended oil is able to maintain its stability over a suitable period of time to ensure that there are no problems.
· Blend this product between 50 and 80 ℃. If this product is heated above 80 ℃, deterioration may occur.
Other Precautions
· If stored in a tank, maintain the conditions described below to protect from deteriorating. Maximum storage temperature: 50 ℃
Limit storage term: 6 months
Before handling this product, refer to the current Safety Data Sheet for recommended protective equipment, and detailed precautionary and hazards information.If SDS is not listed on the homepage, please contact our sales representative.
